Memorizing The Channels - Insignia NS-LCD22 Guia Del Usuario

NS-LCD22.fm Page 9 Monday, February 19, 2007 1:39 PM
Insignia NS-LCD22 LCD TV
To navigate the menu:
1 With the television turned on, press the
MENU button. The main menu opens.
2 Press or to select a menu page.
3 Press ENTER or
4 Within the menu, use
navigate through the options or adjust an
option. Press ENTER or
setting, enter a sub-menu, or toggle the
settings of the selected menu item.
5 Press MENU to return to the previous level
menu, or press EXIT to exit the main menu
and return to your program.
Note
Menu items that are not selectable are grayed out.
Displaying the information banner
To display the information banner:
• Press the DISPLAY button to display the
information banner. The information banner
displays status information such as the
channel number and signal source.
Depending on the mode, different information
is displayed. In DTV mode, more information,
such as the channel number, channel name,
and signal resolution can be displayed.
Selecting the on-screen menu language
To select the menu language:
1 Press MENU.
2 Press or to select Setup menu, then
press ENTER or
3 Press or to select Menu Language,
then press ENTER or
language.
4 Press EXIT to return to watching the
television.
Selecting the input signal source
to enter that menu page.
, , , or to
to confirm a

Memorizing the channels

to access the submenu.
Selecting the tuning band
to select the
www.insignia-products.com
To select the input signal source:
1 Press INPUT. The SOURCE INPUT menu
opens.
2 Press or to select the input source.
Options include:
• TV—Watch the TV signal.
• Composite (or S-Video)—Watch the
signal from the AV INPUT or S-Video
terminals.
• Component—Watch the signal from the
COMPONENT INPUT terminals.
• VGA—Watch the signal from the VGA
jack.
• HDMI—Watch the signal from the HDMI
input jack.
3 Press ENTER or to select the input
source.
4 Press EXIT to return to watching the
television.
When you turn on the television for the first time,
you should perform an auto channel search to
set up the stations on your television.
Note
Be sure to select the TV source input before
completing this procedure.
Before your television can memorize the
available channels, you must specify the type of
signal source that is connected to the television,
such as antenna or cable.
To select the tuning band:
1 Press MENU.
2 Press or to select Setup menu, then
press ENTER or to access the submenu.
9