Memorizing The Channels; Selecting The Signal Source; Storing Channels In Memory Automatically; Adding And Erasing Channels - Insignia IS-LCDTV32 Guia Del Usuario

IN-LCDTV-32.book Page 14 Friday, May 13, 2005 4:15 PM

Memorizing the Channels

Your LCD TV can memorize and store all the
available channels for both antenna and cable
channels. After the available channels are
memorized, use CH+/- to scan the channels.

Selecting the Signal Source

Before your LCD TV can memorize the available
channels, you must specify the type of signal
source that is connected to the unit. (i.e., an
antenna or cable system)
1 Press Menu to display the menu main page.
2 Press CH+/- repeatedly to select CH item.
3 Press Enter to access the submenu.
The TV/Cable menu item will be highlighted
automatically.
4 Press Enter to toggle TV or Cable.
If you are connected to an antenna, please
select TV. If you connect cable, please select
cable.

Storing Channels in Memory Automatically

1 Press Menu to display the menu main page.
2 Press CH+/- repeatedly to select CH item.
3 Press Enter to access the submenu.
4 Press CH- repeatedly to highlight Auto
Search item.
14
5 Press Enter to store channels in memory
automatically.
The unit will begin memorizing all the
available channels. During the process of the
Auto Search, you can press Menu to exit.

Adding and Erasing Channels

1 Press Menu to display the menu main page.
2 Press CH+/- repeatedly to select CH item.
3 Press Enter to access the submenu.
4 Press CH- to highlight Channel No item.
5 Press VOL+/- to select a channel number you
want to add or erase.
You can also use number buttons to select a
desired channel number directly.
6 Press CH- to highlight Add/Erase item.
7 Press Enter to toggle Add or Erase.
When the item is set to erase, the selected
channel will be erased.
When the item is set to add, the selected
channel will be added.
www.insignia-products.com
IS-LCDTV32 32-inch Color TV