Delivery Contents; Part Identification; Troubleshooting - Silverlit BLU-BOT Manual De Instrucciones

FCC Statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1)This device may not cause harmful interference, and
2)This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Care and Maintenance:
- Wipe the toy gently with a clean cloth.
- Keep the toy away from direct heat.
- Do not submerge the toy into water that can damage the electronic
assemblies.
Notes:
- Keep this instruction manual for future reference.
- Users should keep strict accordance with the instruction manual while operation
the product.
- Under the environment with electrostatic discharge, the toy may malfunction
and require user to reset the toy.
Battery requirement for Blu-Bot:
Power Supply :
Rating : DC 3.7 V , 3.5 W
Batteries : 1 x 3.7 V LiPo Rechargeable Battery Pack (included)
Capacity : 500 mAh
Silverlit SAS, Espace Green Parc, Route de Villepecle, 91280 Saint Pierre du Perray / France.
©2014 Silverlit. All rights reserved.
2
3. Charging the Blu-Bot
1. Connect the USB cable from charging 2. Insert the charging plug into the
socket to computer. charging socket on the Blu-Bot.
Note: 1. When the LED indicator on the Blu-Bot starts blinking, recharge the batteries.
2. It can recharge batteries either the Blu-Bot is power on or off.
3. The Blu-Bot can operate for about 60 minutes per every 60 - 80 minutes charging when power off.
4. Before recharging the battery, wait 10 - 15 minutes for it to cool down.
4. Operation Steps
Start to play
- Switch on your Blu-Bot.
POWER
MODE DC IN - Press the Mode button to switch between 3 different modes.
OFF ON
The LED indicator shown as the right diagram.
SHIFT GO
- 3 Modes for selection.
• Program mode (default)
• Dance mode
• Guard mode
- Blu-Bot will randomly moves if there is no input.
- Blu-Bot will go to Sleep mode after no input for 10 mins.
4
6. Dance Mode
Purple LED
Mode status shown through LED light
Blue Purple Red
Dance mode
Program mode Guard mode
- Press the "Mode" button to select "Dance" mode
(LED indicator is in purple color).
- Press "Left" or "Right" button for toggle selection of
3 dances. You will hear a short music introduction of
the dance music.
- Press "Go Button" to start the dance.
- Press any button to abandon the dance.
Action Button Movement
Last dance
Next dance
6
8. Obstacle and Companion Detection
- During idling, walking or dancing, Blu-Bot will detect the obstacle
in front and automically turns to different directions to avoid the
obstacle.
Note: Object detection may vary from different colors and material reflection. The sensor would have has best performance
in white color material.
8
10. Start the App
- Start up Blu-Bot app and there are 3 icons in the main page.
• Link : Press to enter into main menu page.
• Info : Press to enter information page.
• Setting : For option setting.
10
11.2. App - Gesture Control mode
- Follow the gesture diagram on next page and wipe
your finger on screen to control Blu-Bot's movement.
- Press "Talk" button to record your voice, then press
"Play" button to broadcast it via Blu-Bot's speaker.
- Press "Listen" button to pick up the sound via Blu-
Bot's microphone, press the "Play" button to
playback in smartphone.
- Press one of the three pre-recorded messages
button to broadcast the pre-record messages in
voice changer mode via Blu-Bot's speaker.
Tips: Place the Blu-Bot's back facing to user
when operating all commands.
12
11.3. App - Robot Dance mode
- Press "Dance Music" button to select one of the
three dance music.
- Press "Go" to start dance, press it again to stop.
- Press "Drum pads - SFX 1 to 9 button" to jam
sound effect during Blu-Bot's dance.
- Press "Talk" button to record your voice, then press
"Play" button to boardcast it via Blu-Bot's speaker.
- Press "Listen" button to pick up the sound via Blu-
Bot's microphone, press the "Play" button to playback in
smartphone.
- You can pre-record up to 3 messages and boardcast
it in voice changer mode via Blu-Bot's speaker.
14
12. Operating Tips:
1. Only operate the Blu-Bot on flat, smooth (but not slippery) and dry surfaces or low pile carpets. Hair, carpet or dirt can affect
the operation of the Blu-Bot.
2. Do not operate the robot on sand or through water or snow. If your Blu-Bot gets wet, wipe it with a towel and allow it to dry
completely.
3. Do not operate near concrete walls which may disturb bluetooth transmission.

13. Troubleshooting

Symptom Cause
Blu-Bot does not react, or react - High-frequency interference occurred near to
poorly to the mobile device. high-voltage lines, transformers and some types of
building.
- iPod touch, iPhone or iPad batteries are weak.
- Robot batteries are weak.
- Bluetooth may not be in connection with your robot.
- The toy is in stand-by mode.
Loss of control. - Bluetooth signal of mobile device was obstructed.
Blu-Bot runs slowly, - Power switch is not in "ON" position.
erratically or does not run. - Weak batteries.
Bluetooth connection unsuccessful. - Other bluetooth device connected.
Blu-Bot
TM
16
This toy is equipped with a LiPo rechargeable
battery, please pay attention to the following
cautions for safety use:
- Do not dispose the battery in fire or heat.
- Do not use or leave the battery near a heat source such as fire
or heater.
- Do not strike or throw the battery against hard surface.
- Do not immerse the battery in water, and keep the battery in a
cool dry environment.
- When recharging, only use the battery charger specifically for
that purpose.
- Do not over-discharge the battery.
- Do not connect the battery to an electrical outlet.
- Do not directly solder the battery and pierce the battery with a
nail or other sharp object.
- Do not transport or store the battery together with metal objects
such as necklaces, hairpins etc.
- Do not disassemble or alter the battery.
- Charge the battery every 6 months.
- Battery inside the toy is not replaceable
3. The charging process will begin automatically
and the LED indicator will flash in purple color.
Unplug the charging plug after the charging
completed and LED indicator turns off.
Program mode
(Blue light)
Dance mode
(Purple light)
Guard mode
(Red light)
- When Blu-Bot meets a robot companion during walking or idling,
they will greet to each other with a robot "Greeting" message.
- Press the "Link" button.
- The screen will show main menu with following 4 play
mode selections:
• Program mode • Robot Dance mode
• Gesture Control mode • Voice Change mode
Info
Link
Setting
Help Back
Talk Play Listen Pre-recorded
Button Button Button messages
Help Back
Dance
music
Drum
pads
Talk Play Listen Pre-recorded
Button Button Button messages
Solution
- Avoid these if possible, or choose another place to
operate the vehicle.
- Switch off the toy and turn it on again.
- Recharge iPod touch, iPhone or iPad.
- Change all batteries in vehicle with new alkaine
batteries.
- Recheck if your iPod touch, iPhone or iPad connects
with your vehicle in Bluetooth.
- Play in a more open place.
- Switch on the power.
- Recharge the batteries.
- Disconnect other bluetooth device and try again.

1. Delivery contents

Instruction Manual Blu-Bot
Safety precautions
- Parents: Please read the operating instructions carefully with your children prior to the first use.
- Stop the Blu-Bot through the transmitter before picking it up.
- Keep hands, hair and loose clothing away from the moving parts, e.g. hand and foot, when toy is switched on.
- Do not operate the remote controlled Blu-Bot on streets. Avoid hitting people, pets or home furnishings.
Warning: Conversion or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the
product.
The crossed-out dustbin symbol indicates that batteries, rechargeable batteries,
button cells, battery packs, etc. must not be put in the household waste.
Batteries are harmful to health and the environment. Please help to protect the
environment from health risks. If the toy is out of use, please use common
household tool to break the product for built-in rechargeable battery operated
toy or unscrew the battery door for replaceable battery operated toy, then take
the battery out from the toy. Dispose of battery in accordance with your local
battery recycling or disposal laws.

2. Part Identification

Facial Expression
Display
Sensor
Microphone
5. Program Mode
Blue LED
Mode status shown through LED light
Blue Purple Red
Program mode Dance mode Guard mode
- The Blu-Bot default in the "Program mode" and LED
indicator is in blue color.
- Input steps by follow the actions listed in the right
diagram to program the Blu-Bot's actions.
- Press "Go button" to start the action.
- After input the steps, "Go" button must be pressed to
activate the action within 30 seconds, otherwise it will
return to previous status.
7. Guard Mode
Red LED
Mode status shown through LED light
Blue Purple Red
Guard mode
Program mode Dance mode
- Press the "Mode" button to select the "Guard" mode
(LED indicator is in red color).
- Press "Go button" to start guarding.
- When an intruder within 1 meter range is detected,
the alarm will be activated. Blu-Bot will generate
alarm sound and move around.
- Press any button to stop the alarm.
- Press "Go button" to restart guarding.
APP PLAY
9. How to Connect the Blu-Bot
Turn on
Go to App Store / Search "Blu-Bot App"
Go to Gogole Store download & install the Blu-Bot
Ready to Connect
Open the App
Play Bluetooth
IOS
- Search and download the Blu-Bot App in App store.
- Turn on the Blu-Bot.
- Turn on your mobile device.
- Go to "Setting" menu, turn on bluetooth function, search
and connect with the device "Robot_Silverlit".
- Then launch the Blu-Bot app to play with the Blu-Bot via
bluetooth control.
11. Four Play Modes
11.1. App - Program mode
Walking
Step
Voice Play Button
Talk Play Listen
Button Button Button
Pre-recorded
messages
- Drag and drop the "Walking step" icons to
Column A.
- Drag and drop the "Head movement" icons to
Column B.
Clear
- Drag and drop the "Facial Expression" icons to
Button
Column C.
- Press "Send" button to send commands to your
Blu-Bot or press "Clear" button to reset.
- Press "Go/Stop" button and Blu-Bot will start the
programed actions.
- Press "Voice play" button to enter to voice play
menu. (Control refer to other modes)
11.2. App - Gesture Control mode
Forward
Forward Backward
Left
Control Command
11.4. App - Voice Change mode
Voice
Change
Cursor
- Press "Record button" to record a message.
Preset
- Move the voice change cursor to the position
Voices
you want or press 'Preset Voice" button for
preset effect.
- Press "Play button" to listen voice changed
message.
- Press "Preset Voice" button or "Voice Change
Cursor" to change the recorded voice.
- Press "Save button" to save the voice changed
messages. It can save up to 3 messages.
- Press "Load button" to load 3 of the saved
messages.
For Ages 5+
WARNING:
Ab 5 Jahre
Pour 5 ans et plus
CHOKING HAZARD - Small Parts. Not for
Voor leeftijd 5+
Para 5+ años
children under 3 years.
Dai 5 anni in su
This product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Recharging Cable
Waste Electrical and Electronic Equipment
(WEEE)
When this appliance is out of use, please remove all batteries and
dispose of them separately. Bring electrical appliances to the local
collecting points for waste electrical and electronic equipment. Other
components can be disposed of in domestic refuse.
Power switch
OFF
LED
Indicator
Action button
front
PROGRAM DANCE GUARD
Mode
POWER
MODE OFF ON DC IN
Button
SHIFT GO
Shift
Button
Action button
left
Action button
back
BLU-BOT
Action Button Movement
Forward
Backward
Forward left
Forward right
Fast backward
SHIFT
Head nodding
SHIFT
Head turn left
SHIFT
Head turn right
SHIFT
Activate all actions being input
GO
* The diagram is showing the IOS version.
Android
- Search and download the Blu-Bot App in Google play store.
- Turn on the Blu-Bot.
- Turn on your mobile device.
- Go to "Setting" menu, turn on bluetooth function, search
and connect with the device "Robot_Silverlit".
- Then launch the Blu-Bot app to play with the Blu-Bot via
bluetooth control.
Help Head movement Back
Column A Column B Column C Go/Stop
Forward Head shake Head shake
Nod
Right Right
Help
Back
Save Load Reset Record Play
button button button button button
ENGLISH
EI-5336
1
ON
Charging
socket
Action button
right
3
5
7
9
Facial
Expression
Send
11
Left
13
15