Press the MODE button 1 to confirm the setting. You will now return
to compass mode.
Please read the following example to understand the declination
effect: The current direction is N 10 degrees. If the declination angle is
set at 30 degrees, the final direction is changed to NW 340 degrees.
Note: You will find information on the declination data for your location
positioning in the Internet.
Altimeter Mode
Press the MODE button 1 to proceed to altimeter mode. „ALTI"
appears in the display.
Press the SELECT button 2 in altimeter mode. You can choose
between the following sub-functions:
–
Clock (ALTI)
–
Memory of maximum altitude (HIGH)
–
Memory of minimum altitude (LOW)
–
Total height gain (UP)
–
Total height loss (DOWN)
–
Number of hills (HILL)
–
Record (RECORD)
GB/MT
85