Aqua Medic ECOplant LED Manual De Instrucciones página 7

1. Technical Data
Power requirements: 100 - 240 V AC, 50 - 60 Hz.
- 3 watts high-performance LEDs of 6500 K and 3500 K
- colour temperature 5500 K
- expected life span according to manufacturer's information app. 50,000 hours
- safety voltage 24 V with external power pack
Versions:
- ECOplant LED 30: 18 watts (2 x 3 watts 3500 K and 4 x 3 watts 6500 K)
Dimensions (l x w x h): app. 300 x 120 x 25 mm
Fitting adjustable for aquaria with 300 – 500 mm length
- ECOplant LED 60: 36 watts (4 x 3 watts 3500 K and 8 x 3 watts 6500 K)
Dimensions (l x w x h): app. 600 x 120 x 25 mm
Fitting adjustable for aquaria with 600 – 800 mm length
- ECOplant LED 90: 54 watts (6 x 3 watts 3500 K and 12 x 3 watts 6500 K)
Dimensions (l x w x h): app. 900 x 120 x 25 mm
Fitting adjustable for aquaria with 900 – 1,100 mm length
- ECOplant LED 30 twin: 2 x 18 watts (4 x 3 watts 3500 K and 8 x 3 watts 6500 K)
Dimensions (l x w x h): app. 300 x 210 x 25 mm
Fitting adjustable for aquaria with 300 – 500 mm length
The body is made of anodized aluminium. The cooling is done passively.
2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
ECOplant LED incl. power pack 24 V DC output
•
Aquaria fixing
•
3. Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only openly above
•
the aquarium. It must not be mounted under a cover since there, it might overheat and get
possibly damaged by condensation at night. The light is not waterproof.
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning and operating, take care that no humidity passes the ventilation slits and enters
•
the interior of the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
7