Getting Started; Filling The Reservoir - Waterpik WP-450 Manual De Instrucciones

8

GETTING STARTED

Important! Turn Water Flosser
off and charge for 24 hours
before first use. Plug the cord into
any standard electrical outlet. Make sure you
push the switch into the "OFF" position before
charging. The unit will not charge if the switch
is in the "ON" position. See "Care of your
Waterpik Water Flosser" for guidance on how
®
to look after your battery. The Waterpik
Flosser will stay charged for up to 2 weeks
depending on use.

Filling the Reservoir

Lift flip top on reservoir and fill the reservoir
with lukewarm water. Disconnect charging cord
from the unit prior to filling the reservoir and
product use.
Water
®
IMPORTANT!
TURN OFF.
OFF
Charge for 24 hours
before first use.
Inserting and Removing Tips
Insert tip into the center of
the knob at the top of the
Water Flosser handle. The
colored ring will be flush
with the end of the knob if
the tip is correctly locked
into place.
To remove the tip from
the handle, press the
tip eject button
and pull tip from
the handle.