Operation; Checking The Battery Charge Level; Choice Of Gear; Set The Direction Of Rotation - Parkside PBSA 12 C2 Traducción Del Manual De Instrucciones Original

GB MT
Warning! Observe the
safety information in
the operating instruc-
tions for your Parkside
X 12 V Team series re-
chargeable battery.
7) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.

Operation

Checking the battery charge
level
The battery's (
cated by the charge state indicator (
42
7) charge level is indi-
The LEDs indicate the battery's charge
level, when the device is in operation.
Press and hold the power button (
red-yellow-green => Battery fully charged
red and yellow
red

Choice of gear

Slide the gear selector (5) to 1 or 2,
corresponding to a low or high torque
selection.
A gear change may only be per-
formed in standstill mode!

Set the direction of rotation

You can select the direction of rotation
with the direction switch (clockwise and
anticlockwise direction) and secure the de-
vice against accidental start up.
1. Wait for the device to shut-down.
2. Clockwise direction:
Press direction switch (6) to
the right.
3. Anticlockwise direction:
Press direction switch (6)
to the left.
4. Switch lock: Bring direction
switch to neutral position.
The direction changed may only be
performed in standstill mode.

Torque setting

4). You can preset the maximum torque by ro-
tating the torque adjustment ring (3).
19+1 torque levels are provided.
=> Battery half charged
=> Battery needs
to be charged
9).