Bestway 58486 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance. (For market
other than EU)
• Cleaning and user maintenance must be performed by an adult
above 18 years old who is familiar with the risk of electric shock.
NOTES:
• Place the sand filter on solid, level ground. Ensure the sand filter is
at least 2 meters away from poolside. Keep distance as far as
possible.
• Pay attention to position pool and sand filter so adequate
ventilation, drainage, and access for maintenance is available.
Never place the sand filter in an area that may accumulate water,
or on a walking path with lots of foot traffic.
• It is necessary to have the plug accessible after installation of the
pool. The plug of the sand filter shall be at least 3.5 m away from
the pool.
• Atmospheric conditions may affect the performance and life span of
the sand filter; take adequate precautions to protect the sand filter
from unnecessary wear and tear that may occur during periods of
cold or hot weather and/or exposure to sun.
• Please examine and verify all sand filter components are present
before use. Notify Bestway at the customer service address listed
on this manual for any damaged or missing parts at the time of
purchase.
• It is imperative to change as soon as possible all deteriorated parts.
Only use parts approved by the manufacturer.
• Do not allow children or adults to lean or sit on the apparatus.
• Do not add chemicals to the sand filter.
• When chemical products are used to clean the pool water, it is
recommended to respect a minimum filtration time to preserve the
health of swimmers which depends on compliance of health
regulation.
• Only the media provided or specified by the manufacturer is to be
used with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations
4

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido