Descargar Imprimir esta página
ABB ACS350 Guia De Inicio Rapido
Ocultar thumbs Ver también para ACS350:

Publicidad

Enlaces rápidos

ACS350
MUL1-R4 Installation Instructions
WARNING! Before installing MUL1-R4
option, read the safety instructions and
mechanical and electrical installation
instructions in the drive User's Manual.
Follow the instructions when installing,
operating and servicing the drive. If
ignored, physical injury or death may
follow, or damage may occur to the
drive, motor or driven equipment.
3. If control cables or fieldbus option modules will be installed,
remove the detachable lid (3) from the gland box cover.
M4×8
1. Fasten the gland box frame to drive with two M4×16 screws
and one M4x8 screw. Note: The M4×8 screw is already
installed in the drive.
3
4. With any fieldbus option module except FRSA-00, install the
option grounding plate to the gland box frame. See Mechanical
installation in the drive manual.
© 2008 ABB Oy. All Rights Reserved.
1
2. Fasten the gland box frame to wall with four M4 screws (not
included).
4
5b
5. Install the clamp (5a) for the control cable, or if cables are run
in conduits, replace all clamps with suitable glands (not
included). Run cables through the clamps and tighten. Strip
cable ends. Fasten the grounding conductor (PE) of the input
power cable and the twisted shield of motor cable under the
grounding clamps (5b). Connect the conductors to appropriate
terminals. See Electrical installation in the drive manual.
3AUA0000025916 Rev. B / 28.02.2008
2
5a

Publicidad

loading

Resumen de contenidos para ABB ACS350

  • Página 1 (5b). Connect the conductors to appropriate remove the detachable lid (3) from the gland box cover. installation in the drive manual. terminals. See Electrical installation in the drive manual. © 2008 ABB Oy. All Rights Reserved. 3AUA0000025916 Rev. B / 28.02.2008...
  • Página 2 11. Fasten the hood to wall with one M4 screw (not included). 12. Drive with MUL1-R4 option installed. ABB Oy AC Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: www.abb.com...
  • Página 3 WARNUNG! Lesen Sie vor der Installation der optionalen Kabelanschlusseinheit ADVERTENCIA Antes de instalar la opción MUL1-R4, lea las instrucciones de ADVARSEL! Før MUL1-R4 optionen installeres, læses sikkerhedsinstruktionerne mit Kabelverschraubungen MUL1-R4 die Sicherheitsvorschriften und Anweisungen seguridad, así como las instrucciones de la instalación mecánica y eléctrica en el og de mekaniske og elektriske anvisninger i drevets Brugermanual.
  • Página 4 AVVERTENZA! Prima di installare l’opzione MUL1-R4, leggere le istruzioni per WAARSCHUWING! Lees, vóór het installeren van de MUL1-R4 optie, de AVISO! Antes de instalar a opção MUL1-R4, leia as instruções de segurança e as l’installazione meccanica ed elettrica e le norme di sicurezza contenute nel veiligheidsvoorschriften en de mechanische en elektrische installatievoorschriften instruções de instalação mecânica e eléctrica no Manual do Utilizador do Manuale utente del convertitore di frequenza.

Este manual también es adecuado para:

Mul1-r4