ABB ACS310 Instrucciones De Instalación
Ocultar thumbs
Ver también para ACS310:
- Manual del usuario (400 páginas) ,
- Manual del usuario abreviado (54 páginas) ,
- Instrucciones de instalación (4 páginas)
Publicidad
Enlaces rápidos
ACS310, ACS320, ACS350 and ACS355
MUL1-R3 Installation Instructions
WARNING! Before installing MUL1-R3
option, read the safety instructions and
mechanical and electrical installation
instructions in the drive user's manual.
Follow the instructions when installing,
operating and servicing the drive. If
ignored, physical injury or death may
follow, or damage may occur to the
drive, motor or driven equipment.
Note: You cannot lead the Safe torque off (STO) cable
through the gland plate in the ACS355.
3. If using FPBA-01 or FCAN-01 option module, remove part
from gland box frame by bending it.
1. Fasten the gland box frame to drive with two M4×12 screws.
3
4. If control cables or fieldbus option modules will be installed,
remove the detachable lid (4) from the gland box cover.
© 2010 ABB Oy. All Rights Reserved.
1
2. Fasten the gland box frame to wall with four M4 screws (not
included).
4
5. With any fieldbus option module except FRSA-00, install the
option grounding plate to the gland box frame. See Mechanical
installation in the drive manual.
2
5
3AFE68643147 Rev. D / 2010-01-25
Publicidad
Manuales relacionados para ABB ACS310
Resumen de contenidos para ABB ACS310
- Página 1 See Mechanical from gland box frame by bending it. remove the detachable lid (4) from the gland box cover. installation in the drive manual. © 2010 ABB Oy. All Rights Reserved. 3AFE68643147 Rev. D / 2010-01-25...
- Página 2 10. Fasten the hood to drive with two M3×12 screws. 11. Fasten the hood to wall with one M4 screw (not included). 12. Drive with MUL1-R3 option installed. ABB Oy Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: http://www.abb.com...
- Página 3 ADVARSEL! Før MUL1-R3-optionen installeres, bør man læse sikkerheds- WARNUNG! Vor Installation der Option MUL1-R3 müssen die Sicherheits-vorschriften ADVERTENCIA Antes de instalar la opción MUL1-R3, lea las instrucciones de instruktionerne og instruktionerne vedrørende mekanisk og elektrisk installation i und die Anweisungen zur mechanischen und elektrischen Installation in der seguridad y las instrucciones de la instalación mecánica y eléctrica en el manual del drevets brugerhåndbog.
- Página 4 AVVERTENZA! Prima di installare l’opzione MUL1-R3, leggere le istruzioni per WAARSCHUWING! Lees, vóór het installeren van de MUL1-R3 optie, de AVISO! Antes de instalar a opção MUL1-R3, deve ler as instruções de segurança e l’installazione meccanica ed elettrica e le norme di sicurezza contenute nel manuale veiligheidsvoorschriften en de mechanische en elektrische installatievoorschriften in as instruções de instalação eléctricas e mecânicas no manual do utilizador.