ABB ACS150 Guia De Inicio Rapido

ACS150 and ACS350
MUL1-R3 Installation Instructions
WARNING! Before installing MUL1-R3
option, read the safety instructions and
mechanical and electrical installation
instructions in the drive user's manual.
Follow the instructions when installing,
operating and servicing the drive. If
ignored, physical injury or death may
follow, or damage may occur to the
drive, motor or driven equipment.
3. If using FPBA-01 or FCAN-01 option module, remove part
from gland box frame by bending it.
1. Fasten the gland box frame to drive with two M4×12 screws.
3
4. If control cables or fieldbus option modules will be installed,
remove the detachable lid (4) from the gland box cover.
© 2006 ABB Oy. All Rights Reserved.
1
2. Fasten the gland box frame to wall with four M4 screws (not
included).
4
5. With any fieldbus option module except FRSA-00, install the
option grounding plate to the gland box frame. See Mechanical
installation in the drive manual.
QUOTE OR BUY ONLINE
www.inverterdrive.co.uk
2
5
3AFE68643147 Rev. C / 03.03.2006