Honeywell RTH4300B Manual De Funcionamiento página 12

Operating Manual
To adjust program schedules About your new thermostat
Press SET 3 times, then adjust time.
Press SET, then set desired temperature.
69-2226EFS—05
Set To
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri
M28317
Set To
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri
M28318
1. Press SET until Set Schedule is displayed.
s t
2. Press or
(Mon-Fri), then press SET.
s t
3. Press or
time period, then press SET.
4. Set time and temperature for the next time
period (Leave). Repeat steps 2 and 3 for each
weekday time period.
5. Press SET to set weekend time periods (Sat-
Sun), then press RUN to save & exit.
Note: Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Note: To cancel an unwanted time period (except
Wake), press and hold
in the Set Schedule mode.
10
to set your weekday Wake time
to set the temperature for this
s + HOLD for 4 seconds while