Conecte Los Suministros; Complete The Installation - Kohler K-470 Guía De Instalación Y Cuidado

9.
Connect the Supplies
Connect the supply tubes, risers, or hoses to the valve inlets and then to the
shut-off valves. Left is hot and right is cold.
Tighten all connections.
Connecter les alimentations
Connecter les tuyaux d'alimentation, les colonnes montantes ou les tuyaux aux
orifices d'admission du robinet, puis aux robinets d'arrêt. Chaud à gauche et froid
à droite.
Serrer toutes les connexions.

Conecte los suministros

Conecte los tubos de suministro, tubos verticales o mangueras a las entradas de
válvula y luego a las llaves de paso. El lado izquierdo corresponde al agua
caliente, y el derecho, al agua fría.
Apriete todas las conexiones.
10.

Complete the Installation

Connect the tailpiece and P-trap (as needed).
Ensure that all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Adjust as needed.
Open the hot and cold valves and run water for about a minute to remove debris.
Check for leaks.
Turn the faucet off.
1144566-2-B
Valve Inlet
Entrée de valve
Entrada de la válvula
Supply Tube
Tuyau d'alimentation
Tubo de suministro
Shut-off Valve
Arrêt d'alimentation
Llave de paso
14 Kohler Co.