Removing The Oven Door - Avanti DG 2401 C Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REMOVING THE OVEN DOOR

Type A
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
– Open the door completely.
– Push down the lever "L" and, keeping it in this position, slowly close the door in order
to block the hinge (fig. 5.10).
– Grip the door (as indicated in fig. 5.11) and, while closing it, release the two hinges
as shown in fig. 5.12.
– Rest the door on a soft surface.
DOOR ASSEMBLY
– Grip the door with your hands placed near the hinges and raise the levers "H" with
your forefingers (fig. 5.12)
– Insert the hinges in their position until levers "H" are hooked.
– Open the door completely to obtain the release of levers "L".
REMOVING THE OVEN DOOR
Type B
The oven door can easily be removed as follows:
Open the door to the full extent (fig. 5.13A).
Attach the retaining rings to the hooks on the left and right hinges (fig. 5.13B).
Hold the door as shown in fig. 5.13.
Gently close the door and withdraw the lower hinge pins from their location (fig.
5.13C).
Withdraw the upper hinge pins from their location (fig. 5.13D).
Rest the door on a soft surface.
To replace the door, repeat the above steps in reverse order.
Fig. 5.13C
Fig. 5.10
Fig. 5.11
Fig. 5.12
Fig. 5.13D
Fig. 5.13
L
H
Fig. 5.13A
Fig. 5.13B
17

Publicidad

Tabla de contenido
loading

Tabla de contenido