Concept VR3000 Manual Del Usuario página 89

Circular mode
Place the vacuum robot in places where you want to perform a targeted cleaning (approx. area of 1 m
only be controlled by a mobile application.
Single room / Automatic short mode
To activate this mode, press the
or if it finishes cleaning in the room. If you want to cancel this mode, press PAUSE.
MOPPING THE FLOOR
If you have a water tank and the mopping cloth installed, activate the mopping mode with the button
Water spontaneously passes through the mopping cloth. The water tank is washable. Always pour the water
only after removing the water tank from the body of the vacuum robot.
When the vacuum cleaner is on, it automatically starts to dispense water into the mop fabric when the water
container is inserted.
BOTTTOM SIDE OF THE WATER TANK
1. Mopping cloth
2. Velcro fastener
3. Water inlets
VR3000
button on the remote control. The vacuum robot will vacuum for 30 minutes
Open the sealing cap and
fill with water, close the
sealing cap after filling
1
3
EN
). Can
2
.
2
89