Installation - Webasto Black Forest ThrowBack Top Instrucciones De Instalación

ThrowBack Top Installation

Installation

For installation video please visit www.blackforestgear.com.
Step Image
1.
2.
Steps 3-6 are for the Jeep Wrangler 4-Door only. Skip to step 7 if installing your
Webasto ThrowBack Top on a Jeep Wrangler 2-Door.
3.
4.
5.
Description
Carefully remove the Webasto ThrowBack Top
from its packaging. Be sure to save the shipping
box and related materials for optional storage
of the Jeep Freedom Panels explained later in
step 12.
Remove Jeep Freedom Panels per the
manufacturer's recommendations.
Locate the rearmost sport bar hole as shown.
This can be located by feeling through the sport
bar padding approximately 2 ¾" (70mm)
forward of hard top edge.
On the top side of the sport bar padding make
a ½" slit to allow for the ThrowBack retainer
bolt to pass-through during the following steps.
Gain access to the underside of the rear sport
bar hole. Remove the sport bar padding from
both B-pillars by gently lifting upward.
5