Sicce Syncra HF Serie Manual De Instrucciones página 9

MAINTENANCE
Syncra HF needs simple but necessary periodical maintenance for its correct and safe
operation. To perform the maintenance operations first unplug the device from the socket and
strictly comply with the safety instructions and the following procedure:
- Remove the entire pump from the lake.
- Disconnect the base (9).
- Disconnect the pre-filter (6) gently pressing on the flaps on the sides, separate the volute (3)
from the pump (1) removing the screws (4), rinse everything with running water.
- Remove the entire rotor (2) and rinse it with running water, using soap or vinegar and a soft
toothbrush to remove possible encrustation.
- Inspect and clean the rotor housing in the motor body (1), the recirculation system and the
lower bushing with running water.
Perform the mounting operation as follows:
- Insert the O-ring (a) in the housing inside the body (1).
- Insert the O-ring (b) in the housing on the external holed disc of the rotor (2).
- Insert the rotor (2) in the pump body housing (1) checking that the O-ring (2) is correctly
positioned in the housing of the pump body (1) to allow the correct centering of the rotor.
- Insert the O-ring (c) in the external housing of the body (1).
- Assembly the volute (3) to the body (1) pushing it in place and tighten the screws (4).
- Assembly the pre-filter (6).
- Assembly the base (9), put the pump in its original position and connect it to the power
supply.
IMPORTANT: The pump has an electronic motor protection device. In case of abnormal operation
causing the rotor to block due to excessive dirt or other reasons, the pump automatically stops
and it is necessary to unplug the pump and plug it in again to restart it.
INSTRUCTIONS FOR THE CORRECT DISCHARGE OF THE PRODUCT ACCORDING TO EU
DIRECTIVE 2002/96/EC
When used or broken, the product does not have to be discharged with the other waste. It can
be delivered to the specific electric waste collection centers or to dealers who give this service.
Discharge separately an electric tool avoid negative consequences for the environment and for the
Health and allows to regenerate the materials so to have a great saving of energy and resources.
WARRANTY
This product is guaranteed against defects of materials and workmanship for a period of 3 years
from the date of purchase, except the rotor. The warranty certificate must be filled in by the dealer
and must accompany the pump if it is returned for reparation, along with the cash register receipt or
similar document. The warranty covers the replacement of the defective parts. In case of improper
use, tampering or negligence by the buyer or user, the guarantee is void and expires immediately.
The guarantee is also void in absence of the cash register receipt or similar document. The expenses
for shipping the pump to and from the factory, or the repair station, have to be paid by the buyer.
FIND OUT HOW TO GET YOUR PRODUCT GUARANTEED FOR 5 YEARS
To improve our service and our clients' satisfaction, SICCE offers the possibility of adding a 2
years extension to the warranty simply registering your product on our website in the "Quality
Control Department". Fill-in the form and upload the product's purchase receipt. After having
correctly inserted all your data you can fill-in the warranty extension request.