MSA Gallet F1XF Manual De Instrucciones página 11

(3) Follow the same procedure for the right box
(R).
When the lighting module and F1XF boom microphone are both installed inside the helmet, always
disassemble the lightning module first, then the boom microphone.
See the Lighting module user instruction delivered with the product for details on operation.
4.4 Lamp Bracket and Lamp
(2) Insert the lamp into the lamp bracket from
the rear open side (A).
(3) Rotate, then press forward to secure the
attachment (B).
(4) Tilt the lamp up and down into the required
position.
(5) To remove the lamp, slightly press it
towards the helmet while sliding it to the
rear open side (A) of the lamp bracket.
CLICK
(4) Ensure that the cable is placed in the indi-
cated area.
(1) Slide the lamp bracket along the shell shape.
®
Gallet F1XF
Attaching the Accessories
GB
11