Certifications/Approvals/Technical Specifications - MSA Gallet F1XF Manual De Instrucciones

2.3

Certifications/Approvals/Technical Specifications

The helmet meets the (EU) 2016/425 regulation and is certified according to EN 443:2008,
EN 16471:2014 and EN 16473:2014. Module D surveillance by: APAVE (0082), 8 rue Jean-Jacques
Vernazza, CS 60193, 13322 Marseille Cedex 16, France.
Standards and Directives for Helmet
Certification
agencies
Standards and
directives:
Depending on the individual helmet configuration, optional EN 443:2008 requirements may be
marked on the helmet, as explained below:
Type B
Type B3b
E2
E3
*** / **
C
Marking
(Wheelmark):
Standards and Directives for Visors
Certification
agency
Standards and
directives:
(+) or (=)
-30 °C; 120 °C
Ω
A
T
AT
K
N
2C-2.5 and 2C-1.2 UV filtering according to EN170:2002 for metalized and clear face shield
2-1.2 and 5-3.1
INSPEC International Ltd. (0194), 56 Leslie Hough Way, Salford,
Greater Manchester, M6 6AJ, United Kingdom
Helmet
BG BAU, DGUV Test (0299), Prüf- und Zertifizierungsstelle
FB PSA, Zwengenberger Straße 68, 42781 Haan, Germany
(EU) 2016/425 Personal protection equipment regulation
"Helmets for firefighting in buildings and other structures" by
EN 443:2008
INSPEC International Ltd. (0194).
EN 16471:2014 "Helmets for wildland fire fighting" by BG BAU (0299).
EN 16473:2014 "Helmets for technical rescue" by BG BAU (0299).
Indicates the protection zone assured by the helmet (area 1a -1b).
Indicates the extended protection zone assured by the helmet (area 1a-1b and 3b)
Indicates the electrical insulation of the damp helmet.
Indicates a non-conductive surface of the shell.
Indicates protection at low temperature down to -30°C/ -20°C
Indicates a resistance to liquid chemical products. (sulphuric acid, sodium
hydroxide, p-xylene, butan-1-ol, n-heptane)
Meets 2014/90/EU Marine Equipment Directive (MED)
INSPEC International Ltd. (0194), 56 Leslie Hough Way,
Face shield:
Salford, Greater Manchester, M6 6AJ, United Kingdom
BG BAU, DGUV Test (0299), Prüf- und Zertifizierungsstelle
Ocular visor
FB PSA, Zwengenberger Straße 68, 42781 Haan, Germany
(EU) 2016/425 Personal protection equipment regulation
EN 14458:2004 Personal eye equipment
Conforms to the additional requirements of firefighters or general use
Visor type: Eye guard
Visor type : Face guard
Extremes of temperature to which the visor has been tested (-30 °C & +120 °C)
Complies with the electrical properties
Resistance to high energy impact 190 ms-1
Resistance to medium energy impact at extremes of temperatures
Resistance to high energy impact (190ms-1) at extremes of temperature
Resistance to abrasion according EN 168: 2001, clause 15
Resistance to fogging
UV filtering according to EN170:2002 for clear and tinted ocular
®
Gallet F1XF
Description
GB
5