MSA Gallet F1XF Manual De Instrucciones página 7

Ocultar thumbs Ver también para Gallet F1XF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
3.2
Donning
The following adjustments have to be carried out when the helmet is donned.
(2)
Adjust head size:
Turn knob clockwise to tighten the ratchet
headband.
Turn knob anticlockwise to loosen the
ratchet headband.
(3)
Check that the helmet is correctly adjusted:
The helmet should not fall off when the
head is leaning forward and the chin strap
is unfastened.
The chin strap is equipped with 3 adjustment points to allow quick and simple adjustment while the
helmet is on the head.
The wearing angle shown here is indicative.
It may vary slightly depending on user's head size and shape.
(5)
Adjust wearing height with the Velcro
fasteners on the two rear suspension straps.
(1)
Position the chin strap as shown before
donning the helmet.
(1)
Maximally loosen the 3 adjustment points.
(2)
Place helmet on head. Make sure that it is well positioned.
(3)
Close the buckle of the chin strap.
(4)
Tighten the chin strap.
(5)
Tighten the two rear adjustment straps until a tight but still
comfortable fit is achieved.
®
Gallet F1XF
Adjusting the Helmet
GB
7

Publicidad

Tabla de contenido
loading

Tabla de contenido