Kratki PATIO Instrucciones De Instalación Y Funcionamiento página 40

Disabling the programmed mode
1. Press the button or the
mode.
2. Press the button, to go to the Thermostat mode.
Information:
Entering the switch-on temperature of the thermostat will automatically set the
same value for the switch-on temperature of the programmed mode.
Default settings:
Temperature of switching on: 21°C
Temperature of switching ff: „--" (only the control flame)
Temperature settings
1. Press and hold the
the switching off temperature will be displayed (set in the thermostat
mode).
2. To continue, press
symbol and a flashing value to symbolize the switching off temperature.
3. Set the desired temperature using the
4. T o confirm, press
Setting the days
5. The display flashes „ALL". Press the
of the three options to enter (ALL, SA:SU, 1, 2, 3, 4, 5, 6, 7).
6. To confirm, press
SA:SU symbols, respectively, mean Saturday and Sunday. Individual numbers
correspond to the days of the week (e.g. 1 Monday 2 - Tuesday 3 - Wednesday
4 - Thursday, 5 - Friday, 6 - Saturday, 7 - Sunday).
Switching on time settings (Programme 1)
„ALL" option selected
7. The display shows
symbol. Subsequently, the hour will begin to flash.
8. Set the hour using the
9. To confirm, press
you will see the „ALL" symbol. Subsequently, the minutes will begin to flash.
10. Set the minutes using the
11. To confirm, press
40
button, or
button until you see the flashing icon
or wait. The display shows the
.
button or the
.
, 1, „ON", then for a while you will see the „ALL"
and buttons.
. The display shows the
and buttons.
.
the button to go to the manual
icon, the „OFF"
or buttons.
button to select one
icon, 1, „ON", then for a while
. „ON" and