Conceptronic CPHOTOBOX Guía De Iniciación Rápida página 31

ENGLISH
6. Copy LED
Copy LED goes on when:
-
Memory card is being copied to hard disk after pressing copy button.
o
Hard disk is being accessed when in USB OTG mode (PC/OTG device)
o
Device is powered and hard disk is booting
o
Copy LED flashes shortly when device goes into standby mode (60
-
seconds)
7. Power LED
Power LED goes on (BLUE coloured LED) when
-
Power selector is turned on
o
Power LED goes off when
-
Power selector is turned off
o
8. USB OTG Port
USB OTG port has only charging functionality when the device is in
-
cardreader or USB OTG mode (10) and the device is turned off with the
Power On/Off selector
No function when in cardreader mode
-
9. DC IN jack
Insert the delivered Power adaptor (5V DC 1.2A) adapter into the jack
-
for power on or recharge the device
10. Cardreader / USB OTG Selector
In cardreader mode the multimedia photobox can copy the memorycards
-
In USB OTG selection mode the multimedia photobox acts like a portable
-
hard disk and can be accessed through your computer (Win98SE, XP,
W2K)
In USB OTG selection mode you can also copy data from Memorysticks
-
and cameras
11. Reset button
Reset the multimediabox to
-
Solve errors
o
Save battery consumption. Power On/Off will consume more battery
o
power than a reset.
Put the device back to normal operation mode without turning the
o
power off.
31