Conceptronic CPHOTOBOX Guía De Iniciación Rápida página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
ENGLISH
Put the Cardreader / USB OTG Selector to USB OTG and connect the
-
cable to your PC.
Boot your PC
-
For Windows XP (home/Pro) and Windows 2000 no driver installation is
required. The multimedia photobox will be recognized automatically.
If the Multimedia Photobox is type:
CPHOTOB40 or
-
CPHOTOB60 or
-
CPHOTOB80
-
Then your hard disk is pre-formatted FAT32 and you can skip this section.
If your need to format your hard disk: see chapter: how to format your hard
disk under Windows 98, XP or Windows 2000
Notice: Windows can only format partitions smaller than 32GB in FAT32 by
default. You need for example: Swissknife™ from CompuApps, Inc. or
Partition Magic™ from Symantec Corporation to format partitions larger than
32GB.
Notice: you can use a NTFS formatted hard disk but than you cannot use
the device in Cardreader mode.
36

Publicidad

Tabla de contenido
loading

Tabla de contenido