Bresser TempTrend Manual Del Usuario página 27

The wave display on the outdoors temperature indicates
the reception of the remote unit is in good order.
If no readings are received from the remote unit for more
than two minutes, blanks "
further readings are successfully searched.
Check the remote unit is sound and secure. You can wait
for a little while or Hold [
immediate search. If the temperature goes above or below
than the temperature measuring range of the main unit or
the remote unit (stated in specification), the display
will show "
HOW TO READ THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal receiving
status of the main unit. There are three possible forms:
The unit is in searching mode.
Temperature readings are
securely registered.
No signals.
Weather Forecast
This unit is capable of detecting atmospheric pressure
changes. Based on collected date it can predict the
weather for the forthcoming 12 to 24 hours.
Display
Forecast
Display
Forecast
"
Sunny
Rainy
27
" will be displayed until
] for 2 seconds to enforce an
Slightly cloudy
Heavy Rain
GB/IE
Cloudy
Snowy