Before You Begin; Low Battery Warning - Bresser TempTrend Manual Del Usuario

BEFORE YOU BEGIN

For best operation,
1. Insert batteries for the main unit before doing so for
the remote unit.
2. Place the main unit as close as possible next to the
remote unit.
3. Position the remote unit and main unit within
effective transmission range.
Note that the effective range is vastly affected by the
building materials and where the main and remote
units are positioned. Try various set-ups for best
result.
Though the remote units are weather proof, they
should be placed away from direct sunlight, rain or
snow.
BATTERY INSTALLATION: MAIN UNIT
1. Open the battery compartment door.
2. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly
according to the polarities shown.
3. Replace the battery compartment door.
BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment.
2. Select the channel
3. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly
according to the polarities shown.
4. Replace the battery compartment door and secure
its screws.

LOW BATTERY WARNING

When it is time to replace batteries, the respective low-
battery indicator will show up on the indoor or outdoor
temperature.
21
GB/IE