Bimar DL15 TURBO Folleto De Instrucciones página 15

 Do not leave the appliance exposed to atmospheric
conditions (sun, rain, etc..).
 Should the appliance fall or not work correctly, disconnect
the electric cable immediately. Check that it is not damaged,
and thereafter turn it back on: if in any doubt, consult a
qualified professional.
 Do not pull on the power cable or the appliance itself to
unplug the appliance from the mains.
 Do not pull on the power cable to move the appliance.
 Do no use the appliance if it does not work properly or if it
appears damaged; when in doubt, contact a qualified
technician.
 Avoid allowing the appliance to overheat; to this end, check
that the inlet and outlet are free from obstructions: do not
leave anything hanging over or under the unit. Should
overheating occur, the in-built safety device will stop the
convection heater from running. To restore operation,
remove the plug from the mains and wait for it to cool
(about 20-30 minutes) and insert the plug into the plug
point once again.
INSTALLATION

After unpacking, check the integrity of the appliance; if in doubt, do not use it
and
contact a qualified technician. The packaging materials (plastic bags,
polystyrene, metal staples, etc.) must not be left within reach of children, as they
constitute possible safety risks and must be disposed of according to applicable
regulations.
15