Installation Of Devolo Software - Devolo Mesh WiFi 2 Manual De Instrucciones

28 Initial use
Activating WiFi Clone:
b
Activating WiFi Clone by pressing a button:
Briefly press the PLC button on your devolo
devolo Mesh adapter. After the button is pres-
sed, the LED flashes white. Press the WPS but-
ton on your router within 2 minutes. Please
consult your router's instruction for use to find
out how long to press the button for.
or
b
Activating WiFi Clone from the web interface.
More information about this function can be
found in Chapter WiFi Clone.
For unimpaired performance, please switch off
the router Wi-Fi. The devolo adapters then form
a pure devolo Mesh network. By that, you enab-
le the full range of Mesh functions and provide
the best performance.
For information on how to switch off the
router Wi-Fi, please refer to the product do-
cumentation of your router.
devolo Mesh WiFi 2
3.4 Installation of devolo soft-
ware
Installing devolo Cockpit software
devolo Cockpit finds all accessible devolo Mesh ad-
apters in your devolo Mesh network, displays infor-
mation about these devices and encrypts your
devolo Mesh network individually. You can use the
software to navigate to the integrated web inter-
face.
Operating systems supported by devolo Cockpit
(Version 5.0 or later):
b
from Windows 7 (32-bit/64-bit) or later,
b
from Ubuntu 13.10 (32-bit/64-bit),
b
from Mac (OS X 10.9)
You can find the product manual, software
and additional
devolo Cockpit online at
cockpit.
Downloading the devolo Home Network App
The devolo Home Network App is devolo's free
app also for checking and configuring WiFi, PLC
and LAN connections for the devolo Mesh adapter
(using a smartphone or tablet). The smartphone or
information on
www.devolo.com/