Reset Button; Network Jacks; Wi-Fi Antennas; Integrated Electrical Socket - Devolo Mesh WiFi 2 Manual De Instrucciones

24 Introduction

2.3.4Reset button

The reset button (next to the network jacks) has
two different functions:
Restart
The device restarts if you press the Reset button for
less than 10 seconds.
Factory default settings
1
To remove a devolo Mesh adapter from your
network and successfully restore its entire con-
figuration to the factory defaults, press and
hold the reset button longer than 10 seconds.
Keep in mind that all settings that have already
been made will be lost!
2
Wait until the LED flashes white and then dis-
connect the devolo Mesh adapter from the
mains supply.
The
successfully removed from your existing
network.
devolo Mesh WiFi 2
devolo Mesh adapter

2.3.5 Network jacks

You can use the network jacks on the devolo Mesh
adapter to connect it to stationary devices such as
computers, game consoles, etc. using a standard
network cable.

2.3.6 Wi-Fi antennas

The internal Wi-Fi antennas are for connecting to
other network devices wirelessly.

2.3.7 Integrated electrical socket

Always use the integrated electrical socket on the
devolo Mesh adapter when connecting other
consumers to the mains supply. In particular,
electronic devices with mains adapter can
negatively affect PLC performance.
The integrated mains filter in the devolo Mesh
adapter filters any such external interference and
reduces any impairment of PLC performance.
has been