Comfort Glow QF4570R Instrucciones De Instalación Y El Manual De Propietario página 8

6. Setting child lock
Function is to avoid misoperation from children. Locking can be set in both power-on and power-off
modes.
And
MAINTENANCE
1. Glass Information
• Under no circumstances should this product be operated with missing or broken glass.
• Do not strike or slam the glass.
• Do not use abrasive cleaners to clean the glass.
• Replacement glass is available from the manufacturer and replacement should be carried out by a
qualified service person.
2. Cleaning
• To clean the unit, first turn off controls on unit and unplug unit from power source.
• To clean the glass door: remove dust with clean dry cloth or to remove finger prints and other marks
clean glass with clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surfaces.
• Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use abrasive
cleaners or spray liquids on this surface.
3. If you do not use the heater for a long time, please take out the remote batteries (to prevent corrosion) as shown
below. Store the remote in a safe place.
Digital display indicates time value for the timer. Press the
UP or DOWN button more than once, the value will vary
from 0 to 12hr (1 hr interval) in circulation.
The light is on when timer –power-on is set.
Press Temp Up and Temp Down buttons simultaniously
once for 3 seconds. Locking is complete when unit beeps.
When locked, control panel and remote control will not
function.
When release is needed, please re-press Temp Up and
Temp Down buttons simultaniously once for 3 seconds.
Unlocking is complete when unit beeps. Lock indication
disappears. Control panel and remote control return to
function.
8