Install The Wireless-B Usb Network Adapter's Software - Cisco Systems Linksys WUSB11 Guía De Instalación Rápida

Install the Wireless-B USB Network
1
Adapter's Software
IMPORTANT: Windows 98SE, Me, and 2000 users do not
connect the Adapter to Your PC until instructed to do so
or the setup will not work.
The Wireless-B USB Network Adapter
Setup Wizard will guide you through
the software installation procedure
for Windows 98SE, Me, and 2000.
A
Insert the Setup CD-ROM into
your computer's CD-ROM
drive. The Setup Wizard should
run automatically, and the
Welcome screen should
appear. If it does not, click Start
and choose Run. In the field
that appears, enter
D:\setup.exe (if "D" is the letter
of your CD-ROM drive).
B
To install the Adapter, click
Install.
C
After reading the License
Agreement, click Next to
accept the agreement.
D
The Setup Wizard will ask you to
choose a network mode. Click
the Infrastructure Mode radio
button if you want your wireless
computers to communicate
with computers on your wired
network using a wireless
access point. Click the Ad-Hoc
Mode radio button if you want
multiple wireless computers to
communicate directly with
each other.
2
B
C
D