Cleaning And Maintenance - Concept ES 1000 Manual Rápido De Usuario

EN

CLEANING AND MAINTENANCE

Never use scourers, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the
appliance.
Note: All parts except the body with a motor (13) can be cleaned in the dishwasher.
1. Switch off and unplug the appliance.
2. Turn the lid with feeding tube (2) anticlockwise and remove it from the bowl with spout (11).
3. Remove the disc (8 or 9) and the disc holder (10) out of the bowl with a spout.
4. Turn the bowl with a spout (11) anticlockwise and remove it from the body with a motor (13).
5. Clean the bowl, pusher, lid with a feeding tube, disc holder and discs using warm water with a washing-
up liquid or in the dishwasher.
Clean the discs very carefully. The cutting edges are very sharp!
6. Wipe the body with a motor (13) with a moist cloth.
Danger: Never immerse the body with a motor in water, nor rinse it under the tap. Do not
clean it in the dishwasher either.
Caution: If water or other liquids gets between the body (13) and the bowl with a spout, dry
the body with a motor (13) thoroughly before next operation.
7. Wipe all parts of the appliance dry with a dry cloth.
STORAGE
1. Switch off and unplug the appliance.
2. Let the appliance cool down.
3. Put the bowl with a spout (11) on the body (13) and turn it clockwise until it clicks.
4. Put the disc holder (10) into the bowl with a spout, put the lid with a feeding tube (2) on the bowl and
turn it clockwise until it clicks.
5. Put the pusher (1) in the feeding tube.
6. Wind the power cord up and fix it on the bottom side of the body with a motor (13).
7. Store the appliance in a safe and dry place, preferably on the working top in your kitchen.
36
ES 1000