General Safety Rules; Work Area; Personal Safety; Electrical Safety - Ryobi EJS-500QEO Manual De Utilización

GB
F D

GENERAL SAFETY RULES

WARNING
Read all instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury. The term "Power
Tool'' in all of the warnings listed below refers to
your mains operated (corded) power tool or
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
SAFETY ALERT SYMBOL. Indicates caution or
warning. May be used in conjunction with other
symbols or pictures.
WARNING: Failure to obey a safety warning can
result in serious injury to yourself or to others.
Always follow the safety precautions to reduce
the risk of fire, electric shock and personal injury.
WARNING: Do not attempt to operate this tool
until you have read thoroughly and understood
completely safety rules, etc. contained in this
manual. Failure to comply can result in accidents
involving fire, electric shock or serious personal
injury. Save owners manual and review
frequently for continuing safe operation and
instructing others who may use this tool.
The operation of any tool can result in
foreign objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed.
We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with shields.

WORK AREA

Keep work area clean and well lit. Cluttered and dark
■
areas invite accidents.
Do not operate power tools in explosive atmospheres,
■
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away while operating a
■
power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify
■
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
E I P NL S DK N FIN GR
English
Avoid body contact with earthed or grounded
■
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
■
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
■
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an extension
■
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use
■
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
Use safety equipment. Always wear eye protection.
■
Safety equipment such as dust mask, non-skid safety
shoes, hard hat or hearing protection be used for
appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off
■
position before plugging in. Carrying power tools with
your finger on the switch or to plug in power tools that
have the switch to ON position can cause accidents.
Remove any adjusting key or wrench before turning
■
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at
■
all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
■
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
If devices are provided for the connection of dust
■
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
■
tool for your application. The correct power tool will
do the job better and safer at the rate for which it is
designed.
8
RO
H CZ RUS
HR
PL SLO TR