Ryobi RBL26BP Manual De Utilización página 15

GB
F D E I
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician.
For service we suggest you return the product to your
nearest AUTHORIZED SERVICE CENTER for repair.
When servicing, use only identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly
and understand completely the operator ʼs
manual. Save this operatorʼs manual and review
frequently for continuing safe operation and
instructing others who may use this product.
SAVE THESE INSTRUCTIONS.
FEATURES
PRODUCT SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.9kg
Engine displacement . . . . . . . . . . . . . . . . . . . . . . 25.4cc
Air Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 km/h
Air Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 m
Sound power level . . . . . . . . . . . . . . . . . . . . . .104 dB(A)
Sound pressure level . . . . . . . . . . . . . . . . . . . . .93 dB(A)
Maximum engine performance . . . . . . . . . . . . . . 0.90 kW
Maximum rotational speed of the engine . . . . . 8500 rpm
Engine speed at idling . . . . . . . . . . . . . . 2800~3800 rpm
Fuel consumption at max
engine performance . . . . . . . . . . . . . . . . . . . . . 0.55 L/h
Fuel tank volume . . . . . . . . . . . . . . . . . . . . . . . . . . 0.45 L
Vibration
- Main handle. . . . . . . . . . . . . . . . . . . . . . . . . 1.95 m/s
- Whole body . . . . . . . . . . . . . . . . . . . . . . . . . 0.26 m/s
DESCRIPTION
1. Nozzle
2. Upper tube
3. Elbow
4. Bellows
5. Cable tie
6. Tube clamp(s)
7. Throttle control handle
8. Engine
9. Harness straps
10. Harness height adjustment
11. Ignition switch
12. Throttle trigger
13. Cruise control (Throttle lock)
14. Waist strap
15. Upper tube
P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT
English
16. Choke lever
17. Throttle cable
18. Primer bulb
19. Starter grip
20. Screws
21. Air filter cover
22. Air filer
23. Air cleaner knob
ASSEMBLY
UNPACKING
Carefully remove the tool and any accessories from
■
the box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage or
■
damage occurred during shipping.
Do not discard the packing material until you have
■
carefully inspected and satisfactorily operated the tool.
WARNING
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
3
/min
NOTE: Read and remove all hang tags and store with
your Operatorʼs Manual.
WARNING
Stop the engine and disconnect the spark plug
wire before installing parts, making adjustments,
cleaning, or when not in use. Failure to do so
could result in possible serious personal injury.
2
ASSEMBLING THE BLOWER TUBES (Figure 2)
2
CAUTION
Make all adjustments to the harness straps
before starting the blower to avoid the possibility
of injury.
ADJUSTING HARNESS AND WAIST STRAPS
Straps should be adjusted to a comfortable position
before starting the blower.
To adjust harness strap assembly:
Blower should be in operating position before
■
adjusting the harness straps. Slip arm through
harness strap and onto shoulder, then repeat for the
other shoulder.
There are three possible height adjustment positions
■
that can be used to easily adjust harness.
Slip top buckle of harness from adjustment slot and
■
position to desired height location.
10
LV SK BG