Installation - Klarstein Garfield Eco Manual De Instrucciones

INSTALLATION

To turn the door
Required tools: Flat screwdriver, Phillips screwdriver, hexagon spanner.
• Make sure the power is off.
• Tilt the unit back slightly and lean it against a solid wall.
• Keep all parts in a safe place until the unit is installed again.
• Do not place the unit on the floor as this may damage the cooling circuit.
• Have a second person help you remove the doors and reinstall the unit.
1
Carefully remove the top
cover.
2
Loosen the suspension
with a Phillips
screwdriver.
3
Remove the cover on the
other side with the flat
screwdriver.
EN
23