Bunn Phase Brew HT Manual De Uso Y Cuidado página 6

1. place bunn coffee filter into the brew funnel.
2. measure fresh coffee into the filter, shaking gently to level
3. slide brew funnel into funnel guides.
4. fill carafe with water – minimum 4 cups (20 oz.),
h m
HEATING WATER
auto
clock
on/o
start
5. position carafe on base under brew funnel.
6. press on/off button to begin 6-minute heating phase.
h m
HEATING WATER
auto
clock
on/o
start
7. 4-minute brewing phase begins immediately after heating
brewinG better
wITh Phase Brew
the grounds.
We recommend 1 – 2 heaping Tbsp. of drip grind per cup.
h m
HEATING WATER
auto
clock
on/o
start
to maximum 8 cups (40 oz.).
Open spin lid on top of brewer; pour water into top tank.
Close spin lid. Do not open lid during heating or brewing phases.
Preheating for models with a thermal carafe is recommended. See h m
HEATING WATER
Brew Better Tips on page 5 for details.
auto
clock
on/o
start
Brewer is on when the red light under the button is illuminated.
The warmer plate will also be on – and will automatically shut
off after 2 hours.
Digital display will read 'Heating Water' and a moving 'racetrack'
graphic will be displayed.
phase is completed.
At the end of the brewing phase, remove brew funnel and discard
filter and grounds. Do not touch hot grounds.
To turn the warmer off when the brewing phase completes, push
the On/Off button (no red light visible).
h
HEATING WATER
clock
on/o
h m
HEATING WATER
auto
clock
on/o
start
m
h
HEATING WATER
auto
clock
on/o
start
4
m
auto
start