Timer Recording; Using Show View Number To Make Timer Recordings - Panasonic DMR-E95H Instrucciones De Funcionamiento

Timer recording

DVD
TV
Í DVD
DIRECT TV REC
AV
HDD
1 2
Numbered
4 5
buttons
7 8
CANCEL
¢ CANCEL
0
SKIP
STOP
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
SUB MENU
PROG/CHECK DISPLAY
PROG/CHECK
TIMER ERASE
F TIMER
F
EXT LINK DUBBING
EXT LINK
A B
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
Using S V number to make timer
HOW IEW
recordings
Entering S V numbers is an easy way of timer recording. You
HOW IEW
can find these numbers in TV listings in newspapers and magazines.
1
Press [ShowView].
ShowView
Remain HDD 30:24 SP DVD
12:53:00 15. 7. TUE
Enter ShowView Number by using 0-9 key.
2
Press the numbered buttons to enter
the S V number.
HOW IEW
Press [2] to move back to correct a digit.
3
Press [ENTER].
TIMER
Remain HDD 30:24 SP DVD
RECORDING
12:54:00 15. 7. TUE
Name Date Start Stop Mode
1 ARD 15/ 7 TUE 19:00 20:00 SP
Programme Name
≥Confirm the programme and make corrections if necessary
using [3, 4, 2, 1] ( page 20, step 3).
≥When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
≥You can also press [REC MODE] to change the recording
mode.
≥VPS/PDC ( right)
ON!)OFF (– – –)
≥You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" ( right, Relief Recording).
≥RENEW (Auto Renewal Recording) [HDD] ( page 20)
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press
[ENTER] ( page 44).
VOLUME
CH
HDD, DVD
DVD SD/PC
3
CH
6
ShowView
9 ShowView
INPUT SELECT
MANUAL SKIP
SLOW/SEARCH
PAUSE PLAY/x1.3
FUNCTIONS
ENTER
RETURN
STATUS
TIME SLIP
REC MODE REC
REC MODE
CREATE
AUDIO
CHAPTER
C
1:58 SP
1:58 SP
VPS HDD
PDC DVD
OFF HDD
4
Press [ENTER].
The settings are stored.
TIMER
Remain HDD 30:24 SP DVD
RECORDING
12:55:00 15. 7. TUE
VPS
No. Name Date Start Stop Mode
PDC
01 ARD 15/ 7 TUE 19:00 20:00 SP OFF
New Timer Programme
Repeat steps 1–4 to programme other recordings.
5
Press [F TIMER].
"F" lights on the unit's display to indicate timer recording
standby has been activated.
≥The message screen
appears. Only play is
possible while timer
recording is in standby ( page 22, 23). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥The unit is not off. To save power, turn the unit off by
pressing [Í DVD].
∫ To release the unit from recording standby
Press [F TIMER].
"F" goes out.
≥Be sure to press [F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if "F" is displayed.
∫ To cancel recording when recording has
already begun
Press [F TIMER].
≥You can also press and hold [∫] on the main unit for more than
3 seconds to stop recording.
[Note]
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even
when playing.
≥Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode ( page 35).
≥"F" flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the "F" flashes on the unit display. In this case,
press [F TIMER] to put the unit in the timer recording standby
mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
∫ VPS/PDC function ( page 54)
As long as a VPS/PDC signal is being broadcast by the TV
station, even if the broadcast programme time changes, the
recording time automatically changes to match the new
broadcast time.
To activate the VPS/PDC function
In step 3 in the VPS/PDC column, press [3, 4] to select "ON".
∫ Relief Recording
When the recording drive is set to "DVD" for timer recording and
if the programme will not fit onto the disc, the recording drive will
be altered to the "HDD" automatically.
≥If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (" " is displayed.) ( page 22).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥Relief recording is not activated when recording the programme
with VPS/PDC and it is extended so that it no longer fits on the
disc.
1:58 SP
Disc
HDD
DVD space
Check to make sure "OK"
OK
is displayed ( page 21).
Timer standby is active. Playback is possible.
RQT7463
19
19