Panasonic DMR-E95H Instrucciones De Funcionamiento página 37

3 Press [3, 4, 2, 1] to select the titles or play lists and
press [ENTER].
≥To select a multiple number of items together, press [;]
to add the check mark and press [ENTER] ( below,
Multiple editing).
≥To show other pages ( below)
≥To edit the transferring (dubbing) list ( below)
6
Press [3, 4] to select "Set" and
press [ENTER].
The transferring (dubbing) list is registered.
7
Press [3, 4] to select "Start
Dubbing" and press [ENTER].
Press [2, 1] to select "Yes" and press [ENTER] to start
transferring (dubbing).
∫ To edit the transferring (dubbing) list
Select the item in step 5 ( page 36, right column)
1 Press [SUB MENU].
2 Press [3, 4] to select the operation and press
[ENTER].
§
Multiple editing is possible ( below).
To cancel all registered transferring (dubbing) setting and lists
In step 3 ( page 36, right column)
1 Press [3, 4] to select "Cancel All" and press [ENTER].
2 Press [2, 1] to select "Yes" and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title, still picture, etc. has been erased at the transfer
(dubbing) source
–When steps have been taken, for instance, to turn off the unit,
open the tray, change the transfer (dubbing) direction, etc.
To show other pages
Press [3, 4, 2, 1] to select "Previous" or "Next" and press
[ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
≥When you switch between the "Video" and "PLAY LIST" tab, the
check mark is cancelled.
Transferring (dubbing) list indicators
(NTSC)
(PAL)
Data size of each registered item
Destination Capacity: 4343MB
No. Size
Erase All
New item
Add
Erase §
Previous
Move
∫ To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
≥If stopped partway, transferring (dubbing) will be up to that point.
However, in high speed mode, only titles that have completed
transferring (dubbing) at the point stopped are transferred
(dubbed). [Even if the title was not transferred (dubbed) to the
DVD-R, the amount of remaining writable disc space becomes
less.]
∫ To return to the previous screen
Press [RETURN].
∫ Recording and playing while transferring
(dubbing)
You can record and play using the HDD while high speed
transferring (dubbing).
Press [ENTER] to cancel the screen display.
≥To confirm the current progress
Press [STATUS].
[Note]
≥You cannot perform chasing play or edit etc. while transferring
(dubbing).
≥Timer recordings executed while transferring (dubbing) are
recorded to the HDD regardless of the recording drive settings.
≥You cannot play a play list while transferring (dubbing) titles with
"One time only recording" restriction ( page 35).
Titles and play lists that can be transferred
(dubbed) in high speed mode to DVD-R
( page 46)
Title with "One time only recording" restriction
Titles erased from the HDD by "One time only
recording" restriction after transferring (dubbing).
Title or play list contains still picture(s)
≥Still picture(s) cannot be transferred (dubbed).
Title or play list recorded using a different
encoding system from that of the TV system
currently selected on the unit.
≥Titles and play lists displaying these marks
cannot be selected.
Data size recorded to the transfer
Size: 0MB
(dubbing) destination
Name of item
≥For normal speed transfer (dubbing), the
total data size changes according to the
recording mode.
Next
≥When transferring (dubbing) to the HDD
Set
01/01
using high speed mode, data
management information is
automatically added so the total data
size becomes larger than the sum of the
data size for all registered items.
RQT7463
37
37