Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer DEH-1400 Operación Manual

Audio Adjustments

Introduction of audio
adjustments
1 display
AUDIO
Shows the audio adjustments status.
2 indicator
LOUD
Appears in the display when loudness is
turned on.
Press to display the audio function
AUDIO
names.
Press repeatedly to switch between the
AUDIO
following audio functions:
(balance adjustment)—
FADER
(loudness)—
LOUD FIE
enhancer)— (source level adjustment)
SLA
• When selecting the FM tuner as the source,
you cannot switch to
SLA
• To return to the display of each source, press
.
BAND
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
1 2
(equalizer)—
EQ
(front image
.

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press to select
AUDIO
Press until
AUDIO FADER
play.
• If the balance setting has been previously
adjusted, will be displayed.
BAL
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
• – is displayed as the front/rear
F15 R15
speaker balance moves from front to rear.
• is the proper setting when only two speakers
0
are used.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
• – is displayed as the left/right
BAL:L9 BAL:R9
speaker balance moves from left to right.
.
FADER
appears in the dis-
is displayed.
BAL:0
En
10