Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Equalizer - Pioneer DEH-2750 Manual De Operación

Audio Adjustments

Introduction of audio
adjustments
1 2 3
1 CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
2 Audio display
Shows the audio adjustments status.
3 FIE indicator
Shows when the front image enhancer is
turned on.
4 LOUD indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer)
LOUD (loudness)FIE (front image enhan-
cer)SLA (source level adjustment)
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
# To return to the display of each source, press
BAND.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
# If the balance setting has been previously ad-
4
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
FAD F15  FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
BAL L9  BAL R9 is displayed as the left/right
speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
SPR-BASS
POWERFUL
NATURAL
VOCAL
CUSTOM
EQ FLAT
Equalizer curve
Super bass
Powerful
Natural
Vocal
Custom
Flat
Section
06
9
En