AXIL AC0539E Manual Del Usuario página 30

Step 2: Installing wall mount
This product offers two installing ways: wooden wall and cement wall.
Determine your mounting type and proceed according.
Installing ways of batten wall
Use an electonic detector in lay position to detect the position of batten, then making
a mark. Put the wall mount in the installing position flatly, using it as template, lining
out holes in the batten. Using a aiguille of dia 4.5 mm to drill three 50 mm deep holes.
Securely mount the wall plate with supplied Long bolts (G) and washers (I) by Box wrench
(L). As shown in Fig. 1.
L
G
I
50
4. 5
Fig. 1
30