Publicidad
Idiomas disponibles
Idiomas disponibles
Installing ways of cement and beton wall
Put the wall mount flatly in the installing position, using it as template, lining out the
hole on the wall. Use a aiguille of dia 10.5 mm to drill three 50 mm deep holes. Insert
the wall anchor (I) into the mounting holes, and lightly tap them flush to the wall with a
hammer. Securely mount the wall plate with supplied Long bolts (G) and washers (I) by
Box wrench (L). As shown in Fig. 2.
Carefully: Wall anchor is just fit for cement and beton wall. Don't use wall anchor in
drywall to install bracket.
L
G
H
I
50m m
10.5m m
Fig. 2
Installing the Plastic Cover
Secure the separated Plastic Cover over the
Wall Plate by pushing them toward each
other until they lock in place. See Fig. 2B.
Fig. 2B
31
Publicidad
