Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3: Installing the LCD
According LCD hole's size, deep, position to choose bolts. Using chose bolts (A-F) to
install the LCD on the plate or staff (Fig. 3). If your display > VESA 100, you need to use
lengthen staffbetween your display and this plate. According your display hole's size,
position to choose Installation lengthen staff. As shown un Fig. 4.
Install the Lengthen staff (J) directly to the plate by using bolts (C) provided (Fig. 5).
Note: Capitulum down.
Carefully: Don't force the bolt to LCD hole,
avoiding damage to people and instrument.
Don't use electronics drill to fasten blot.
C
For M4, M5
bolts to LCD
A-F
J
C
Fig. 5
Assembly
hole (plate)
For M6, M8
bolts to LCD
Fig. 4
32
TV
Plate
Capitulum
Fig. 3
J
Assembly
hole (plate)
Publicidad
