Tabla de contenido
Publicidad
Technical
Information
Flow rate - handshower
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
•
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
•
This trim is for use with rough 10650181.
Données techniques
Capacité nominale - douchette
Datos tecnicos
Caudal máximo - teleducha
•
The finished wall surface must be installed and
made watertight before installation of this trim.
•
To prevent scald injury, the maximum output
temperature of the shower valve must be no
higher than 120° F.
•
Protection against back siphonage is provided
by a double check valve. It should be inspected
yearly.
•
In Massachusetts, the maximum output
temperature of the shower valve can be no higher
than 112° F.
2.5 gpm
Publicidad
Tabla de contenido
