Accessory Installation - WEG SCA06 Guia De Instalacion

Expansion Module for Communication Profibus - ECO3

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the control module of the servo drive.
2. Remove the protective cover from the slot, as shown in figure 4.1.
Figure 4.1: Remove the protective cover
3. Connect the accessory to the appropriate slot, as illustrated in figure 4.2. The accessory
ECO3 can only be connected to Slot 2.
Figure 4.2: Accessory installation
8 SCA06