Harbor Breeze CC52WW5C Manual De Instrucciones página 11

FINAL INSTALLATION
5.
Remove three screws and washers from center of
shade fitter plate (B). Align notch in shade fitter plate
(B) with small protrusion on the inside of the light kit
plate. Secure shade fitter plate (B) with the three
screws (and washers) that were just removed. (Fig. 5)
In order to have access to pull chains later on, thread
fan and light pull chains through corresponding holes
on the outer rim of the shade fitter plate (B). (Refer to
Fig. 5.)
6.
Install the candelabra base 60-watt max. bulb (I)
included. (Fig. 6)
Important: When you need to replace the bulb,
please allow the bulb and glass shade (E) to cool
down before touching the bulb or the glass shade (E).
7. Align slots on glass shade (E) with protrusions on the
shade fitter plate (B) and twist glass shade (E) to the
right. (Fig. 7)
Note: Pull down gently on the glass shade (E) to
make sure that it is secured completely.
5
Pull Chain
Hole
6
B
7
B
HH
E
11
C
Light Kit
Plate
Pull Chain
Hole
B
C
I
C