Important; Care And Maintenance - Harbor Breeze CC52WW5C Manual De Instrucciones

OPERATION INSTRUCTIONS
3.
Use the fan reverse switch, located on the switch
housing, to optimize your fan for seasonal
performance. (Fig. 3) A ceiling fan will allow you to
raise your thermostat setting in summer and lower
your thermostat setting in winter without feeling a
difference in your comfort.
Note: Wait for fan to stop before moving the
reverse switch.
3A. In warmer weather, setting the reverse switch
in the DOWN position will result in downward
airflow creating a wind chill effect. (Fig. 3A)
3B. In cooler weather, setting the reverse switch in
the UP position will result in upward airflow that
can help move stagnant, hot air off the ceiling
area. (Fig. 3B)
3C. IMPORTANT: Reverse switch must be set
either completely UP or completely DOWN for
fan to function. If the reverse switch is set in the
middle position (Fig. 3C), fan will not operate.

CARE AND MAINTENANCE

At least twice each year, lower motor housing (C) to check motor assembly (D), and then
tighten all screws on the fan. Clean motor housing (C) with only a soft brush or lint-free cloth to
avoid scratching the finish. Clean blades (G) with a lint-free cloth. You may occasionally apply a
light coat of furniture polish to wood blades for added protection.
Important: Shut off main power supply before beginning any maintenance. Do not use water or
a damp cloth to clean the ceiling fan.
3
Switch
Housing
3A
3C
13
3B