Schlage BE365 Instrucciones De Instalación página 2

C
Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole has no mortise, change to the circular faceplate.
Door Edge
No change necessary.
Install Lock
1
Rotate baseplate cam to correct position.
3
Install keypad.
Door Edge
OR
Cam MUST
be vertical!
Route wire over bolt.
Slide tailpiece through slot.
2
Install bolt.
Cam
Actual Size
Retracted
4
Route wire through hole in baseplate.
OR
Wood Block
(Not Included)
Bolt must remain retracted
throughout installation!
Extended