MasterCool 89660 Instrucciones De Operación página 3

E-Z SNAP
TM
UNLOCKED
POSITION
SERVICE
PORT
To attach to the system, make sure that the coupler
is in it's unlocked position. Press the coupler
against the service port until it snaps (locked
position).
EVACUATION OF REFRIGERANT AND
DEEP VACUUM (Fig. C)
TO LOW
SIDE
"SUCTION"
TO HIGH SIDE
"DISCHARGE"
WARNING: This product contains one or more chemicals known to the State of California to cause cancer,
COUPLER (Fig. A)
LOCKED
POSITION
PULL
SLEEVE
to
UNLOCK
TO
RECOVERY/RECYCLING
MACHINE OR
VACUUM PUMP
birth defects or other reproductive harm.
www.mastercool.com
MANUAL COUPLER (Fig. B)
To attach to the system, backdown the plunger by
turning the knob fully counter-clockwise. Connect
to the system by lifting up the sleeve, placing the
service port inside the coupler and releasing to
lock. To start the flow, turn the knob fully clockwise
(opening the service port).
CHARGING (Fig. D)
TO LOW
SIDE
"SUCTION"
TO HIGH SIDE
"DISCHARGE"
SLEEVE
TO FRESH
REFRIGERANT
SUPPLY TANK
OR
CHARGING CYLINDER
3