S A F E T Y
READ AND SAVE THESE INSTRUCTIONS
To reduce the risk of fire, electric
shock or injury to persons,
observe the following:
6
I N S T R U C T I O N S A N D P R E C A U T I O N S
Read this Use & Care Information
carefully before using your new
ventilation unit to reduce the risk of
fire, electrical shock or injury to
persons.
Use this unit only in the manner
intended by Wolf Appliance.
If you have questions, contact us
at www.wolfappliance.com.
Before servicing or cleaning unit,
switch power off at service panel
and lock the service disconnecting
means to prevent power from being
switched on accidentally. When the
service disconnecting means cannot
be locked, securely fasten a
prominent warning device, such as
a tag, to the service panel.
Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction
codes and standards.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel-
burning equipment to prevent
backdrafting.
To reduce the risk of electric
shock, this fan should only be
used with the fan speed control
that shipped installed in the unit.