Advanced; To Convert To Thermostat Mode; To Programme Holiday Mode - Danfoss TP7000 Serie Guia Del Usuario

2.0 Advanced

2.1 To convert to Thermostat mode

The TP7000 can be converted to control at a constant user selected
temperature, instead of following the set programme.
Press and hold
display changes to colon blinking & default
temperature (8°C).
GB
Press
required.
F
NOTE: unit will remain in thermostat mode until the
buttons are pressed together again.
D

2.2 To programme Holiday Mode

ES
(whilst in Thermostat Mode)
DK
The TP7000 can control at a constant low temperature while you are away
on holiday, returning to your programmed settings after a specifi ed number
NL
of days (maximum 99 days).
(If not already in Thermostat Mode, press
I
and hold
changes to colon blinking and 8°C).
GR
Press DAY (display will show a suitcase and
:00).
PL
Press + and - to enter number of days of
LT
holiday (max. 99).
Use and
CZ
temperature, if required.
HR
When selected number of days have elapsed,
the unit will return to normal, controlling
according to your set programmes.
NOTE: Press
exit holiday mode if necessary.
10
and
or to alter temperature as
and together until display
buttons to alter the constant
and buttons together to
together until
and
TP7000 RANGE